Brian Crower Stage 3 Camshafts for 87-92 Toyota Supra

In Stock (2)


Brian Crower Toyota 7MGTE/7MGE Camshafts – Stage 3 – 272 Spec


87-92 Toyota Supra cams are manufactured to top-quality specs. Brian Crower high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every Brian Crower camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Make no mistake, these are top quality Supra cams at an affordable price.

All Brian Crower Supra camshafts are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chatter mark detection, this model can measure 200 parts per hour.

The Brian Crower Stage 3 cams for the MK3 87-92 Supra are designed for a fully built engine. The Brian Crower Stage 3 Supra 7MGE & 7MGTE cams are designed with a longer duration profile and added RPM potential. Tuning and ECU modifications are recommended with the Brian Crower Stage 3 cams. The Brian Crower Stage 3 cams for the MK3 Supra 7MGE & 7MGTE require upgraded valve springs and retainers.


Duration: 272/272

Duration @ .050: 226/226

Lift (in) .342/.342

FITMENT:Toyota Supra 1987-1992

Part Number: BC0322

SKU: BC0322

Vendor: Brian Crower

Additional information

SKU BC0322
Carb Compliance Yes
Prop 65 Unknown
EPA Approved N/A
Weight 12.80 lbs
Dimensions 29.30 × 5.80 × 3.00 in