Brian Crower Stage 3 280 Cams Mitsubishi EVO X

In Stock (2)


Brian Crower Mitsubishi 4B11T Evolution X Camshafts – Stage 3 – 280 Spec


Brian Crower cams for the 08-14 Mitsubishi Evolution X are manufactured to exacting precision. Brian Crower high performance Evo camshafts are ground on state-of-the-art CNC cam grinders to ensure accuracy and tolerances to within .02mm.

Every Brian Crower Evo X camshaft profile has been prototyped and dyno tested for proven horsepower results prior to being produced. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Brian Crower produces first-rate cams at affordable prices.

All Brian Crower Evolution X cams are checked on a high speed, sub-micron accuracy measuring gauge. Brian Crower uses an Adcole Camshaft Measuring System with individual measuring heads for each cam journal and cam lobe. This instrument has .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Up to 200 Brian Crower cams per hour are checked for errors in rise and for any chattermarks.

272 Cam Specs:

Duration @ .050: 240/234

Lift (in): .470″/.445in

Due to the high lift of these camshafts, you must check retainer to valve guide clearence.

Brian Crower 280 degree cams have a longer duration profile and added RPM potential. Intended for fully built engines, Tuning and ECU mods recommended. The BC valvetrain kit below is required for engine longevity.

Part Number: BC0132

SKU: BC0132

Vendor: Brian Crower

Additional information

SKU BC0132
Carb Compliance Yes
Prop 65 Unknown
EPA Approved N/A
Weight 10.30 lbs
Dimensions 19.90 × 6.10 × 2.80 in