ACT Heavy Duty Pressure Plate / 6 Puck Solid Disc Clutch Kit Mitsubishi EVO X GSR

In Stock (3)


ACT 2015 Mitsubishi Lancer HD-M/Race Rigid 6 Pad Clutch Kit


When your engine puts out performance, you need a clutch kit that can handle it properly. ACT Heavy Duty Pressure Plate / 6 Puck Solid Disc Clutch Kit Mitsubishi EVO X GSR provides a generous increase in clamp load which directly increases torque capacity. ACT Clutch kits are offered in a number of configurations and there is one developed specifically for your vehicle.

After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability. ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT’s complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool. The kit guide below will help you select the ACT kit that best fits your needs.


6 Puck Solid Disc (R6)

Increased torque capacity

Faster shifts & reduced inertia

Very good durability but shortened spline life

Absorbs more heat than 4 pad

Harsh engagement with some chatter

Not recommended for street use

HD Pressure Plate

Clamps load increase of 20% to 50%

Pedal feels stock to moderate

Many are SFI Certified to insure safety

Torque Capacity: 650 ft/lb


Vendor: ACT

Additional information

Carb Compliance Yes
Prop 65 Unknown
EPA Approved N/A
Weight 19.10 lbs
Dimensions 14.00 × 14.00 × 5.00 in